STATOR KIT + CDI BOX + IGN COIL HON XR 600 R '88-00'
This product fits specific motorcycles and ATVs. Check the parts finder to confirm it fits your vehicle.
STATOR KIT + CDI BOX + IGN COIL HON XR 600 R '88-00' is backordered and will ship as soon as it is back in stock.
Hassle-Free Returns
Hassle-Free Returns
45-day change-of-mind returns on unused items in their original packaging. Read our returns and refund policy.
Closeout products are not eligible for change of mind returns. Read our returns policy in full.
Delivery & Shipping
Delivery & Shipping
This product is a dangerous good. Higher shipping rates may apply and delivery to some destinations will be delayed. See our shipping policy for details.
This is a bulky product. Additional shipping charges may apply and delivery to some destinations may be delayed or not possible. See our shipping policy for details.
Easy to understand, fast national shipping. Free shipping on non-bulky orders of $199 and over. See our shipping policy for full details.
STATOR KIT + CDI BOX + IGN COIL HON XR 600 R '88-00' is backordered and will ship as soon as it is back in stock.
Fitment
Fitment
Loading fitments...
Description
Description
High-Output Stator 200W + PeakRPM CDI + External Ignition Coil Kit
- Direct replacement for the original unit
- Plug-and-play, direct fit and easy installation
- All products are tested before shipping
Product images are accurate. If unsure, compare the items with your original parts before ordering.
Brand New Aftermarket High-Output Stator 200W
- High-grade lamination materials
- High-grade copper windings resistant to temperatures up to 200°C
- 2 x 100W output
- Connectors included
- Rubber grommet included
An opposite connector (main harness side) is included, as original connectors are often melted, corroded or defective and can cause recurring electrical issues.
Brand New Aftermarket CDI Box
- PeakRPM CDI box provides optimised output for your ride.
- Higher-grade electronic components.
- Quality exceeds OEM equipment.
Brand New Aftermarket External Ignition Coil
- Requires reinstallation of the OEM spark plug cap(s).
- Once the OEM spark plug cap(s) are installed, the coil becomes a direct-fit, plug-and-play unit.
Before Installing the New Stator
- Check the AC output of the stator.
- Replace any burned or corroded connectors on the stator and regulator rectifier.
- Check and repair any melted wiring.
- Apply high-temperature dielectric grease to all connectors.
The stator may use a different wire colour code from the original part. All wires are installed in the correct order; do not change the wiring configuration. This stator is designed as a direct plug-in replacement. Always use thread-locking compound when securing the stator. If the stator includes a pickup coil, check the air gap during installation. Set it as close as possible, but no less than 0.010".
Before Installing the New CDI
The CDI may use a different wire colour code from the original. All wires are installed in the correct order; do not change the wiring configuration. This CDI is designed as a direct plug-in replacement.
Before Installing the New External Ignition Coil
- Remove the spark plug cap(s) from the OEM external ignition coil.
- Screw the cap(s) onto the new external ignition coil.
Warning
Risk of electric shock. Disconnect the battery before servicing. Ensure proper installation by a qualified technician to avoid malfunction.
High-Output Stator 200W Specifications
Dimensions:
- Interior diameter: 54 mm
- Exterior diameter: 115 mm
- Thickness: 15 mm
- Stator-to-grommet wire length: 200 mm
- Grommet-to-plug wire length: 700 mm
Other Specifications:
- Number of wires: 5
- Number of plugs: 5
- Number of pins: 3
- Number of poles: 17
- Alternator resistance (white to green): 0.4 ohms ±20%
- Alternator resistance (yellow to red): 0.4 ohms ±20%
- Source resistance (black/red to green): 140 ohms ±20%
High-Performance CDI Box Specifications
Dimensions:
- Height: 22 mm
- Length: 66 mm
- Width: 42 mm
Other Specifications:
- Number of plugs: 2
- Number of pins: 6
Important Note: The only reliable way to test a CDI box is to swap it with a known-good unit from the same year, make and model. We recommend ruling out all other possible causes before replacing the CDI box.
External Ignition Coil
Specifications not provided.
Specifications
Specifications
- Category (Primary)Hard Parts
- Category (Secondary)Electrical
- Category (Tertiary)Stators, CDI, Ignition Coils
- MPNRMS900-107583
Payment Methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.











