RM Stator & Flywheel Kit - Suzuki DL1000 '02-'09 & '12 (RMS900-108092)
This product fits specific motorcycles and ATVs. Check the parts finder to confirm it fits your vehicle.
RM Stator & Flywheel Kit - Suzuki DL1000 '02-'09 & '12 (RMS900-108092) is backordered and will ship as soon as it is back in stock.
Hassle-Free Returns
Hassle-Free Returns
45-day change-of-mind returns on unused items in their original packaging. Read our returns and refund policy.
Closeout products are not eligible for change of mind returns. Read our returns policy in full.
Delivery & Shipping
Delivery & Shipping
This product is a dangerous good. Higher shipping rates may apply and delivery to some destinations will be delayed. See our shipping policy for details.
This is a bulky product. Additional shipping charges may apply and delivery to some destinations may be delayed or not possible. See our shipping policy for details.
Easy to understand, fast national shipping. Free shipping on non-bulky orders of $199 and over. See our shipping policy for full details.
RM Stator & Flywheel Kit - Suzuki DL1000 '02-'09 & '12 (RMS900-108092) is backordered and will ship as soon as it is back in stock.
Fitment
Fitment
Loading fitments...
Description
Description
Brand new aftermarket Stator and Flywheel kit.
- Direct replacement for the original unit.
- Plug-and-play, direct fit and easy installation.
- High-grade lamination materials.
- High-grade copper windings, resistant to temperatures up to 200°C.
- Pickup/pulsar coil included.
- Connector included.
- Rubber grommet included.
- All products are tested before shipping.
Product images are accurate. If in doubt, compare the items with your original parts.
Before installing the new stator and flywheel:
- Check the AC output of the stator.
- Replace any burned or corroded connectors on the stator and regulator/rectifier.
- Check and repair any melted wiring.
- Apply high-temperature dielectric grease to all connectors.
The stator may have a different wire colour code from the original part. All wires are installed in the correct order; do not change the wiring configuration. This stator is designed as a direct plug-in replacement.
Always use thread-locking compound when securing the stator. If the stator includes a pickup coil, check the air gap during installation. Set it as close as possible, but no less than 0.010".
Warning:
Risk of electric shock. Disconnect the battery before servicing. Ensure proper installation by a qualified technician to avoid malfunction.
Stator Dimensions:
- Interior diameter: 54 mm.
- Exterior diameter: 119 mm.
- Thickness: 25 mm.
- Stator-to-grommet wire length: 160 mm.
- Grommet-to-plug wire length: 430 mm.
- Pickup coil wire-to-grommet length: 150 mm.
Other Specifications:
- Number of wires: 5.
- Number of plugs: 2.
- Number of pins: 5.
- Number of poles: 18.
- Alternator resistance (black to black): 0.6 ohms ±20%.
- Pickup coil resistance (blue to green): 193 ohms ±20%.
Flywheel Dimensions:
- Inner diameter: 120 mm.
- Outer diameter: 149 mm.
- Total height: 65 mm.
- Inside height: 46 mm.
- Centre housing depth: 35 mm.
- Centre housing widest diameter: 35 mm.
- Centre housing thickness: 26 mm.
Specifications
Specifications
- Category (Primary)Hard Parts
- Category (Secondary)Electrical
- Category (Tertiary)Stators
- MPNRMS900-108092
Payment Methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.











